You will want to look your pump over very carefully and get acquainted with the pump prior to starting. Also refer to "Operating Instructions and Maintenance Suggestions" or "Operators Manual" published by WGI for the specific pump type and model.
I. WARNINGS AND PRECAUTIONS BEFORE AND
AFTER
STARTING A WGI RECIPROCATING PUMP.
C. Warnings After starting a WGI reciprocating pump.
1. New non-adjustable lip type packing rings (plunger pumps only) may be expected to leak slightly for a day or so, but will gradually seat. The packing gland must be retightened and periodically checked after the packing has seated.
DO NOT attempt to adjust packing while pump is running.
2. Piston pump packing is available in several different configurations. All are adjustable type packing. Care must be taken to ensure that this packing is not overtightened. On most installations, a very slight drip is desirable to aid in lubrication and as visual proof that the packing is not too tight.
3. After Two (2) Hours Operation (also refer to Appendix I)
a. Check all the crank end connecting rod bearings for proper adjustment. Check connecting rod bolt nut torque and adjust if necessary.
b. Check lubricant level and pressure gauge (if forced lubrication system is furnished).
